RUNXIN F63P Automatic Softener Valve 2.5″ Base
R2 505,00 Incl. VAT
The Runxin F63P automatic softener valve controls full regeneration cycles for water softening systems. It features configurable regeneration (timer or meter), standard 1″ plumbing, and automatic service-to-regeneration sequencing for household water softening.
Runxin F63P Automatic Softener Valve
The Runxin F63P automatic softener valve is a top-mount control valve designed to automate water softening regeneration cycles, reducing manual intervention and maintaining consistent soft water delivery. It supports both timer-based (F63P1) and meter/volume-based (F63P3) regeneration logic depending on model selection, allowing flexibility for different household usage patterns.
This valve manages all key regeneration stages — including service, backwash, brine draw, slow rinse, brine refill, and fast rinse — with programmable settings and LED status feedback. A sturdy composite body with hermetic ceramic insulation ensures reliable operation, while core functions are easily reset after power loss.
It is suitable for residential water softening systems, RO pretreatment softeners, boiler feed setups, and other common softening applications where automatic regeneration is desired.
📐 Softener Tank Sizing Guide
Correct tank size ensures optimal resin capacity and fewer regenerations.
Residential Sizing Benchmarks
| Household Size | Approx Daily Water Use | Suggested Tank Diameter |
| 1–2 people | ~225–450 L/day | 6″–8″ |
| 3–4 people | ~450–900 L/day | 8″–10″ |
| 5+ people | ~900 L+/day | 10″–12″ |
Sizing Notes
- Harder water requires more resin volume for longer run times between regeneration.
- Larger tanks reduce regeneration frequency but need more space.
- Match tank and valve size for proper flow and regeneration performance. (General guidance — adjust for local conditions.)
🕒 Regeneration Timing Recommendations
Because the Runxin F63P supports both timer and volume modes, you can choose based on water usage:
Timer (Days Between Regeneration)
| Usage Pattern | Suggested Interval |
| Light/moderate usage | 3–5 days |
| Moderate usage | 2–3 days |
| Heavy usage or hard water | 1–2 days |
Volume-Based (If Using Meter Mode)
| Hardness Level | Volume Before Regeneration |
| Mild hardness | ~4 000–6 000 L |
| Moderate hardness | ~3 000–4 500 L |
| High hardness | ~2 000–3 000 L |
Notes
- Volume mode regenerates according to actual use — typically more efficient.
- Timer mode ensures regular cycles when usage is consistent.
📌 Practical Installation Advice
- Choose an appropriately sized resin and brine tank based on household size and hardness.
- Verify connection sizes (1″ inlet/outlet, ½″ drain, ⅜″ brine).
- Program regeneration logic depending on whether you choose timer or meter type.
- Monitor early cycles and adjust intervals for efficient salt use and water softness.
- Consider professional installation if unfamiliar with softener plumbing or programming.
| Weight | 3 kg |
|---|
Specifications
Specification |
Details |
| Model | Runxin F63P (includes F63P1 timer type / F63P3 meter type) |
| Product Type | Automatic softener control valve |
| Control Type | Timer (F63P1) or Meter/Volume (F63P3) regeneration |
| Valve Mount Type | Top-mount softener valve |
| Inlet Connection Size | 1″ female (≈ 25 mm) |
| Outlet Connection Size | 1″ female (≈ 25 mm) |
| Drain Port Size | ½″ female (≈ 15 mm) |
| Brine Line Connector | ⅜″ female |
| Rated Flow Capacity | 4 m³/h |
| Operating Pressure Range | 0.15 – 0.6 MPa |
| Operating Temperature Range | 5 °C – 50 °C |
| Tank Compatibility | 6″–18″ resin vessels |
| Power Supply | AC100–240 V → DC 12 V / 1.5 A |
| Controller Interface | LED display with manual regeneration button |
| Valve Body Material | Corrosion-resistant composite |
| Typical Applications | Residential softening, RO pretreatment, boiler feed softening systems |
Pros & Cons
✔ Pros
- Dual regeneration control: supports timer or flow/meter type depending on model.
- Automates full softener cycle (service → regen → rinse → refill) intelligently.
- Rated for 4 m³/h flow — suitable for most residential and light commercial systems.
- LED status display and manual regeneration option.
- Settings remain intact after power interruptions.
✖ Cons
- Requires an external 12 V DC power adapter (included in most kits).
- Programming may require an understanding of softener regeneration logic.
- Valve alone is not a full softener system — requires resin and brine tank.
FAQ's
1: What is the Runxin F63P automatic softener valve used for?
It automates the regeneration process in softening systems, sequencing service, backwash, brine draw, rinse, and refill cycles without manual intervention.
2: Does the F63P require electricity?
Yes. It runs via a 12 V DC power supply provided by an external transformer plugged into AC mains.
3: What’s the difference between F63P1 and F63P3?
- F63P1 uses timer-based regeneration.
- F63P3 uses meter/volume-based regeneration with a flow meter.
This gives flexibility in how regeneration is triggered.
4: What size tanks does it fit?
Designed for 6″–18″ resin tanks, covering most residential softener setups.
5: How does manual regeneration work?
Press the Manual/Return button on the controller to start a regeneration cycle immediately if needed.
Related products
